According to internet it’s adshield and i dont think you should allow this domain: https://redlib.nadeko.net/r/uBlockOrigin/comments/188khmu/site_breaks_with_error_unless_ad_domain_is/

Pinellas County Running: 5.00 miles, 00:10:30 average pace, 00:52:30 duration
slow run. the pace hurt the legs a bit but atleast i kept it light.
#running

Anyone started seeing this from Slashdot? 🤔

Ta, @movq@www.uninformativ.de, yummy. It’s one of the very few good christmas songs in my opinion.

Europe launches a €10.6 billion Iris2 satellite project to rival Starlink
Europe launches €10.6 billion Iris2 satellite project; Paraguay reopens its embassy in Jerusalem, enhancing Israel’s diplomatic status. ⌘ Read more

@prologic@twtxt.net how does one signs up? I am sure you haven’t advertised the service yet, right?

♬ In der Weihnachtsbäckerei ♪ (https://www.youtube.com/watch?v=IFZqDcFU4Ow)!

https://lyse.isobeef.org/kokosmakronen-2024-12-16/

Philosophie de vie, après réflexion : https://si3t.ch/log/2024-12-16-philovie.txt

Brilliant, @movq@www.uninformativ.de, I didn’t think of the keystore! :-D

Me too, @aelaraji@aelaraji.com, I don’t know how many entire books I had to rewrite because of Ctrl+W irreversibly deleting the entire chapter.

Phase Change
⌘ Read more

@movq@www.uninformativ.de HAHA! speaking of reflexes, Ctrl+SHIFT+v to paste and Ctrl+a to get to the start of the line, get me all the time when I’m using a browser … Ctrl+w (delete back a word) is the worst! tabs go Pouf! 🥲

@movq@www.uninformativ.de Where in firefox can I set custom CSS?

@prologic@twtxt.net thanks

@prologic@twtxt.net thanks

@prologic@twtxt.net thanks

@movq@www.uninformativ.de Interesting! I always use uBlock Origin to do that.

@movq@www.uninformativ.de Did it work!? :-D

With these programmable keyboards today, one could easily make the keyboard type the entire password with one key stroke…

Pinellas County - Long Run: 10.02 miles, 00:10:21 average pace, 01:43:37 duration
kept it slow for a low heart rate run. ti took forever to feel comfortable which may have been the excess of pizza and beer yesterday. and honestly, not very good sleep either. forced myself to stop at ten miles mainly because i was over my weekly mileage goal.
#running

@prologic@twtxt.net @movq@www.uninformativ.de Not only the print quality, but the t-shirt itself was often an issue in the past I’ve found. To be fair, my experience is from a decade ago.

9fans is now a moderated list. It’ll take time, but I’m hopeful we can get it back to being a good source of discussion. https://9fans.topicbox.com/groups/9fans/T124eb3ec9c594189-M83bd6a0d97304a9b5cffd91d/9fans-now-moderated

Trying to get some custom T-shirts made. Ordered my first one with – Let’s see what eh quality of the print and T-shirt is before I make any more 😅

hey @iolfree@tilde.club ! it’s been a while, welcome back!

don pour #framasoft terminé : https://soutenir.framasoft.org/fr/. J’ai choisi le don mensuel pour leur donner de la visibilité. C’est peu de choses, mais c’est ma façon de contribuer au libre

An inspiring book on making a life around IT security

Troy Hunt: “Pwned”, The Book, Is Now Available for Free
https://www.troyhunt.com/pwned-the-book-is-now-available-for-free/

I’ve talked about how I do backups on unix a bunch of times, but someone asked again today and I realized I didn’t have it written down where I could point to. So I wrote a lab report: http://a.9srv.net/reports/index.html#vac-unix

@movq@www.uninformativ.de Right, you showed this keyboard stand some time ago. I completely forgot about that.

@eapl.me@eapl.me @bender@twtxt.net @skinshafi@thunix.net The feed that nobody follows out of fear.

When I started programming in Delphi, I always included all the files (not only the *.exe, but also *.pas and what else there was) when giving friends my programs on floppy disks. I didn’t know that the executable was technically enough. :-)

@movq@www.uninformativ.de You won’t believe how happy I was when I turned off my work machine a few minutes ago. It feels absolutely amazing! :-D

@movq@www.uninformativ.de that’s not THAT old! it still can kick a$$ 👍

Threshold: 7.00 miles, 00:09:14 average pace, 01:04:37 duration
did not know what this would be like when i set out. turned out to be a bit of a threshold workout, but did not hurt much. generally a nice day out and a good run even if the legs were heavy.
#running

@aelaraji@aelaraji.com This is an Intel i7-3770 from 2013 with an integrated GPU (HD 4000).

Looks like FreeCAD works fine and I think this is a more appropriate program anyway. 😊

@bender@twtxt.net Hmmm… it makes sense. Now I curious, how old is his hardware though? is it SolveSpace kind of old? or reaaaally Blender 2.4 series kid of old!? 🤔

@aelaraji@aelaraji.com will all those run on his hardware? I don’t think @movq@www.uninformativ.de’s problem is the software, it is that his hardware has gotten too old. :-D

@movq@www.uninformativ.de I know, nobody asked 🤡 but, here are a couple of suggestions:

• If you’re willing to pay for a licence I’d highly recommend plasticity it’s under GNU LESSER GENERAL PUBLIC LICENSE, Version 3.
  
• Otherwise if you already have experience with CAD/Parametric modeling you could give freeCAD a spin, it’s under GNU Library General Public License, version 2.0, it took them years but have just recently shipped their v1.0 👍
  
• or just roll with Autodesk’s Fusion for personal use, if you don’t mind their “Oh! You need to be online to use it” thing.
  

(Let’s face it, Blender is hard to use.)
I bet you’re talking about blender 2.79 and older! 😂 you are, right? JK

@lyse@lyse.isobeef.org Ooohh, nice and long vacation! 😃

@lyse@lyse.isobeef.org Mostly small and simple stuff, like cable management, headphone rests, pill dispensers (that I didn’t end up using), … The most elaborate thing I made was that contraption for my keyboard, which is a bit hard to explain right now, so here’s some photos:

I didn’t end up using that, either. 🥴

In general, I print very little. So little that some of my supplies have simply gone bad, like that “3D LAC” (sprayable glue).

@aelaraji@aelaraji.com Yeah, I saw that when googling the issue. I’m on Linux, there are no DLLs to swap. I could use an older version indeed. 🤔 Let’s see if I can find some better alternative first. (Let’s face it, Blender is hard to use.)

@lime360@lime360.nekoweb.org Welcome yo Twtxt / Yarn.social 👋

METAR
⌘ Read more

Despite being a gray day, I still decided to have a longer lunch break and went for a stroll in the woods: https://lyse.isobeef.org/waldspaziergang-2024-12-12/ Just returned in time for the next meeting.

@lime360@lime360.nekoweb.org Hi there! 👋

@movq@www.uninformativ.de Damn! I’ve been there, and it sucks when it comes to that. and I may be hallucinating but I believe there was some dll file I had to download and put somewhere in blender’s folder and that got it to work back then. Also, what’s the latest version of #blender you could run?

No surprise, @skinshafi@thunix.net, they can be easily mixed up. See, the hemming distance between prologic and _doesnm__ is just 7! :-D

@movq@www.uninformativ.de Fear not, there is probably Paint on DOS! :-D

On a more serious note, what things did you 3D-print?

Yeah, @eapl.me@eapl.me, I kinda like file extensions in some situations. What do you think of twtxt.exe, @bender@twtxt.net? ]:->

Yeah, @movq@www.uninformativ.de! “Sorry boss, I accidentally removed the bug report, because the button suddenly materialized under my cursor.” :-D

Luckily, I do not have to deal with that UI from hell for three and a half weeks very soon.

Agreed, @bender@twtxt.net, bad typography always kills it for me, too.

the feed is made using my own cli app called txtlog, it also supports bluesky cross-posting as well!

the feed is made using my own cli app called txtlog, it also supports bluesky cross-posting as well!

the feed is made using my own cli app called txtlog, it also supports bluesky cross-posting as well!

clearly forgot to add my twtxt feed on search.twtxt.net but now here i am hello hi