@klaxzy@klaxzy.net Yes, if Germany actually opposes this. But so far, there’s only one guy that said something on a press conference. He does speak for the “CDU” party, which is “in command” at the moment, but that’s about it. I don’t trust these people – not until I’ve actually seen them voting against Chat Control. 🥴

@movq@www.uninformativ.de@www.uninformativ.de if I understand chat-control voting correctly at least 14 member states needs to oppose, or, the supporting bloc must fall short of the 65% population threshold. by opposing, germany tossed the supporters below 65%… I also believe this is a great win agains folks like Ashton Kutcher and his lobbying Thorn co.

@movq@www.uninformativ.de Yeah, it’s lovely out there right now.

@movq@www.uninformativ.de That’s satisfying. :-) Not all my clocks are radio-controlled, though.

I’ve got a digital alarm clock from the Netherlands (no idea where I got this) and it always runs an hour late. No clue. I put it on a shelf in the workshop where it causes the least amount of confusion.

@movq@www.uninformativ.de Good glad to hear it 😄

@prologic@twtxt.net Where do I stand on “Chat Control”? How long of a response/rant do you want? 😅 It’s a disaster. As I understand it, they want to spy on me directly on my devices before encryption even happens – jfc, no, fuck off. And since there are so many devices, they want to automate the scanning, which is the worst idea you could possibly have.

@movq@www.uninformativ.de Where do you stand on this nonsense? 🧐😆🤣

Color negro brillante e irresistible.
#catsoftwtxt

@bender@twtxt.net I guess most clocks don’t support that. 😅 My wrist watch can do it, you can select it in the menu:

In general, different transmitter means different frequency and different encoding, for example these two:

• https://en.wikipedia.org/wiki/DCF77
  
• https://en.wikipedia.org/wiki/Time_from_NPL_(MSF)

@klaxzy@klaxzy.net Why, because Germany is now listed as “opposed” on fightchatcontrol.eu? I’m not so sure. This is just one guy (Jens Spahn) saying “no we don’t want it”. That’s not an “official” stance, it’s very fragile and could change any minute. https://netzpolitik.org/2025/eu-ueberwachungsplaene-unionsfraktion-jetzt-gegen-chatkontrolle-innenministerium-will-sich-nicht-aeussern/

Calling it “IBM Bob” … I guess that’s just IBM humor. 🤣 https://www.ibm.com/products/bob

⭐ Excellent petit éditeur de texte multi-plateforme (Linux, Mac, […] 🔗 https://yom.li/notes/20251008110810 🔖 https://micro-editor.github.io/

@klaxzy@klaxzy.net Fuxk yeah 🙌

@important_dev_news@n8n.andros.dev Thank fuxk 🤣

Skateboard
⌘ Read more

@movq@www.uninformativ.de how do you set your clock to use a specific time signal radio station? I have one wall clock in my office, it works great, but no way to set that.

This makes me happy. Radio controlled clocks perfectly in sync. ⌚🥳

https://movq.de/v/6b1847a056/VID_20251007_181904.mp4.mp4

@lyse@lyse.isobeef.org As the kids on imgur say: I always updoot birbs 👍

So green, so many mushrooms. 🤯

@prologic@twtxt.net Oh, I will certainly check this out! Thanks for the tip, mate! <3

@lyse@lyse.isobeef.org Cool! 😎 You might be interested in my own learnings and toying around with building my own container engine / tooling (whatever you wanna call it) box. I had to learn a bunch of this stuff too 😅 Control Groups, Namespaces, Process Isolation, etc.

I went on a short stroll in the woods and came across two great spotted woodpeckers. They were busy with their courtship display, I reckon, so it took them a while to notice me and escape into thicker parts out of sight. That was really awesome. There are a lot of apples and sloes now, looking really good. The cam issues still persist, though, I wish the photos were sharper. Also, I got the error that the function wheel was not adjusted correctly and alledgedly pointed between two options numerous times. And no, it was bang on a setting. https://lyse.isobeef.org/waldspaziergang-2025-10-07/

My open letter, to the European Commission digital markets act team:

Hello,

I am joining other developers, concerned about Googles new plan, to approve every app and effectively destroy most of the competing 3rd party stores this way. The biggest one of these alternative stores, most known for their focus on user and developer privacy, already states, this would make it impossible for them to operate: https://f-droid.org/cs/2025/09/29/google-developer-registration-decree.html
Even communities like the XDA forum, where new developers are often introduced to the world of Android development, would likely be strongly impacted, as making, publishing and installing Android apps is made less accessible.

I am not just writing on their behalf, I run a small website myself (https://thecanine.ueuo.com/), that both provides legal modifications, for some android apps - for example adding an amoled dark theme, to the most popular XMPP chat client for Android, or increasing one of Androids keyboard apps height. This all comes after Googles previous changes to the Android operating system, that prevent users from installing old apps (old to Google, can mean only a couple of months, without an update - https://developer.android.com/google/play/requirements/target-sdk and the target version gets increased every year). I rely on apps developed by a single developer, even for things like making the pixel art presented on my website and sideloading as a way to make these apps work, before developers can catch up to Google’s new requirements - if Google is allowed to slowly kill these options, us digital artists will soon lose the tools we need to create digital art.

In today’s blurry photos series: https://lyse.isobeef.org/rabe-2025-10-06/

@prologic@twtxt.net Oh, that’s cool! :-) Feeding magpies seems to be an Aussie thing, the Cutting Edge Engineering Australia videos usually also include a cute magpie feeding clip.

@bender@twtxt.net Off you go to the magpie hunt! We wanna see Florida pies!

@galegovski@vaporhole.xyz Precisamos publicar muito para começar a ficar parado :-)

Today, I experimented with Linux Capabilities as a continuation to my Unix Domain Sockets research from a few months ago: https://lyse.isobeef.org/caller-information-via-unix-domain-sockets/#capabilities

I learned that I don’t know hardly anything and there is heaps more to explore. Tomorrow, I will do the same in Go and see how that feels.

@bender@twtxt.net See the problem is you don’t live in the “busy” enough 😂 There are roaches everywhere here! 🤣 LOL snakes too! Plovers, Magpies, Crows, Spiders, even Deer for fucks sake 😂

@prologic@twtxt.net I wouldn’t know where to look for little cockroaches, or roaches, in general! LOL. We buy seeds to feed them. But not around the neighborhood, otherwise we would have a problem. 😅

• ¿Te gusta el nuevo pienso? Es bajo en calorías. -
  #catsoftwtxt

@bender@twtxt.net We have quite a few that are basically part of our friendly neighborhood. They knew we won’t chase them aware, scare them, etc. In fact some of us find little cockroaches to feed them, tose ‘em up in the air and watch them sweep in and grab the little suckers 🤣

@bender@twtxt.net Dunno 🤷

Using a Small Paper Clip as SIM Tray Tool ?~L~X https://thenewleafjournal.com/b/87X

@prologic@twtxt.net something happened on this one’s neck, right? Or was it a blow of wind that ruffled the feathers?

@lyse@lyse.isobeef.org @prologic@twtxt.net They’re both great 😃

@lyse@lyse.isobeef.org Here’s my magpie 🤣

I got the magpie again this morning: https://lyse.isobeef.org/elster-2025-10-05/ 02 is at takeoff.

@alexonit@twtxt.alessandrocutolo.it Thanks mate! Ah cool, now I’m curious, what did you make? :-)

You used the rubber hammer to fold the metal, not to set the rivets, right? :-? I glued cork on my wooden mallet some time ago. This worked quite good for bending. But rubber might be even better as it is a tad softer. I will try this next time, I think I have one deep down in a drawer somewhere.

@zvava@twtxt.net No HEAD requests, but regular GETs with If-Modified-Since request headers if possible: https://git.mills.io/yarnsocial/yarn/src/branch/main/internal/fetcher.go#L270

@bender@twtxt.net @alexonit@twtxt.alessandrocutolo.it funnily enough i came up with the idea for a banner field when i started working on bbycll too (though i still need to implement avatar uploads themselves first)

@prologic@twtxt.net i’m guessing then a HEAD request is sent every 5m, and then the feed is fetched if the headers are different?

also what would be the cases where a feed would be fetched more than every five minutes? :o

Flamy skies are always great to look at: https://lyse.isobeef.org/abendhimmel-2025-10-04/

@zvava@twtxt.net @bender@twtxt.net At first I added it without thinking when planning the possible fields based on other UIs I was researching.

I was about to discard it but after thinking about it a bit I noticed that the services allowing to have a separated nick and display_name could unlock some good uses.

For example some added context or at-a-glance information like pronouns or statuses (like Artist [Accepting commissions] or App Name (v2.5)) while other used a more readable version of the nick (blog.domain.com became Person Name's Blog).

Of course it is absolutely optional and it can be safely ignored, but with my vision of being able to build more that a pure twtxt clients, giving it a first-class support just like the other known fields felt right to me.

@lyse@lyse.isobeef.org Great job!

I suggested it because I did it in the past, but never used it on bigger works.

In my case I did it exclusively on really small projects and used a thin rubber head hammer to prevent deforming the metal.

@movq@www.uninformativ.de I can confirm.

An intern practicing with turtle had an error when launching it the first time because it was missing tkinter which it use internally.

I experimented with a 2.4x7mm aluminium rivet I had on hand. As expected, it was quite a bit long. Using my pliers wrench, I was able to crush it down by quite some bit. I should have taken a photo right after the hand riveter for comparison. Now, it’s much smoother and the chance of cutting my hand open is reduced by quite a bit. But breaking the burr with a few file strokes is still necessary. I should get 2.4x4mm rivets and try with them. I reckon they would be more suited for my 0.5mm sheet metal.

With the pliers wrench again, I was able to also crush down the chopped off 3mm copper nail and form a second head. That was surprisingly easy. Now, I need to figure out how to efficiently make a head on the remaining copper nail shaft, so that I can use this again.

Both are rock solid, there’s absolutely no movement at all between the two sheet metal cutoffs.

https://lyse.isobeef.org/tmp/nietenexperiment/

@movq@www.uninformativ.de Too bad. :-/

@movq@www.uninformativ.de Yep, there’s python3-tk and a bunch more packages with extensions.

@lyse@lyse.isobeef.org

I was always under the wrong impression that Tkinter is bundled with Python.

It should be. Maybe your distro splits it off. 🤔

@lyse@lyse.isobeef.org Nope. I think they stayed only one year. 😢

@movq@www.uninformativ.de Nice! Are there still chicken on this field?