Great, last system update broke something, building from current master I get:

/usr/bin/ld: /lib/x86_64-linux-gnu/libm.so.6: unknown type [0x13] section `.relr.dyn'

What the heck!?

And it also appears that I’m not really able to reproduce this unread bug. It only kind of works a single time. And it has something to do with my config. Not sure what it is yet. I also noticed that the <updated> timestamps in the entries somehow shifted between the old and new feed. Da fuq!?

Hmmm, after fixing my feeds to move the <author> from <entry>s to <feed>, Newsboat marked all old affected articles as unread. IDs were untouched, of course. Need to investigate that. Had something similar happen with another feed change I did some time ago. Can’t remember what that was, though.

@mckinley@twtxt.net Thank you! I didn’t even know about signing and encrypting XML documents. Right, RSS is a little bit messy.

Unfortunately, the autodiscovery document in one of your linked resources does not exist anymore. What annoys me in Atom is the distinction between <id> and <link>. I always want my URL also to be my ID, so I have to duplicate that – unnecessarily in my opinion.

Also, never found a good explanation why I should add <link rel="self" … /> to my feeds. I just do, but I don’t understand why. The W3C Feed Validation Service says:

[…] This value is important in a number of subscription scenarios where often times the feed aggregator only has access to the content of the feed and not the location from which the feed was fetched.

This just sounds like a very questionable bandaid to bad software architecture. Why would the feed parser need access to the feed URL at this stage? And if so, why not just pass down the input source? Just doesn’t make sense to me.

Also, I just noticed that I reference the http://purl.org/rss/1.0/modules/syndication/ namespace, but don’t use it in most of my feeds. Gotta fix that. Must have copied that from my yfav feed without paying attention what I’m doing.

Your article made me reread the Atom spec and I found out, that I can omit the <author> in the <entry> when I specify a global <author> at <feed> level. Awesome! Will do that as well and thus reduce the feed size.

@jlj@twt.nfld.uk @xuu@txt.sour.is hello! @prologic@twtxt.net and I were chatting about the question of globally deleting twts from the yarn.social network. @prologic@twtxt.net noted that he could build the tools and endpoints to delete twts, but some amount of cooperation from pod operators would be necessary to make it all work together. He asked me to spawn a discussion of the subject here, so here we are!

I don’t have enough technical knowledge of yarn.social to say with any credibility how it all should work, but I can say that I think it ought to be possible and it’d be good to do for those rare times when it’s needed.

time to go to twittertext sleep I think

@prologic@twtxt.net, business is slow (I also just got off that hyoo-män illness that is going around named COVID), so that leaves me some free time on my entrepreneurial hands. 😂 I have always lurked every couple of weeks or so. I see yarn has regressed on the UI! 😬😩

📣 NEW: Announcing the new and improved Yarns search engine and crawler! search.twtxt.net – Example search for “Hello World” Enjoy! 🤗 – @darch@neotxt.dk When you have this, this is what we need to work on in terms of improving the UI/UX. As a first step you should probably try to apply the same SimpleCSS to this codebase and go from there. – In the end (didn’t happen yet, time/effort) most of the code here in yarns will get reused directly into yarnd, except that I’ll use the bluge indexer instead.

I think Email has been broken on my Pod since some time now since @lyse@lyse.isobeef.org made this commit the default behaviour of the flags/env had changed requiring SMTP_PORT to be set (used to default toi 25) ooops 😅

HM [03;03;07]: 8 mile run: 9.16 miles, 00:12:24 average pace, 01:53:31 duration
met up to run with beth for her 10k time trial
#running

analog circuit debugging is a transcendental experience. every.single.time. #electronics

Universe Price Tiers
⌘ Read more

(cont.)

Just to give some context on some of the components around the code structure.. I wrote this up around an earlier version of aggregate code. This generic bit simplifies things by removing the need of the Crud functions for each aggregate.

A domain object can be used as an aggregate by adding the event.AggregateRoot struct and finish implementing event.Aggregate. The AggregateRoot implements logic for adding events after they are either Raised by a command or Appended by the eventstore Load or service ApplyFn methods. It also tracks the uncommitted events that are saved using the eventstore Save method.

type User struct {
  Identity string ```json:"identity"`

  CreatedAt time.Time

  event.AggregateRoot
}

// StreamID for the aggregate when stored or loaded from ES.
func (a *User) StreamID() string {
	return "user-" + a.Identity
}
// ApplyEvent to the aggregate state.
func (a *User) ApplyEvent(lis ...event.Event) {
	for _, e := range lis {
		switch e := e.(type) {
		case *UserCreated:
			a.Identity = e.Identity
			a.CreatedAt = e.EventMeta().CreatedDate
        /* ... */
		}
	}
}

Events are applied to the aggregate. They are defined by adding the event.Meta and implementing the getter/setters for event.Event

type UserCreated struct {
	eventMeta event.Meta

	Identity string
}

func (c *UserCreated) EventMeta() (m event.Meta) {
	if c != nil {
		m = c.eventMeta
	}
	return m
}
func (c *UserCreated) SetEventMeta(m event.Meta) {
	if c != nil {
		c.eventMeta = m
	}
}

With a domain object that implements the event.Aggregate the event store client can load events and apply them using the Load(ctx, agg) method.

// GetUser populates an user from event store.
func (rw *User) GetUser(ctx context.Context, userID string) (*domain.User, error) {
	user := &domain.User{Identity: userID}

	err := rw.es.Load(ctx, user)
	if err != nil {
		if err != nil {
			if errors.Is(err, eventstore.ErrStreamNotFound) {
				return user, ErrNotFound
			}
			return user, err
		}
		return nil, err
	}
	return user, err
}

An OnX command will validate the state of the domain object can have the command performed on it. If it can be applied it raises the event using event.Raise() Otherwise it returns an error.

// OnCreate raises an UserCreated event to create the user.
// Note: The handler will check that the user does not already exsist.
func (a *User) OnCreate(identity string) error {
    event.Raise(a, &UserCreated{Identity: identity})
    return nil
}

// OnScored will attempt to score a task.
// If the task is not in a Created state it will fail.
func (a *Task) OnScored(taskID string, score int64, attributes Attributes) error {
	if a.State != TaskStateCreated {
		return fmt.Errorf("task expected created, got %s", a.State)
	}
	event.Raise(a, &TaskScored{TaskID: taskID, Attributes: attributes, Score: score})
	return nil
}

The following functions in the aggregate service can be used to perform creation and updating of aggregates. The Update function will ensure the aggregate exists, where the Create is intended for non-existent aggregates. These can probably be combined into one function.

// Create is used when the stream does not yet exist.
func (rw *User) Create(
  ctx context.Context,
  identity string,
  fn func(*domain.User) error,
) (*domain.User, error) {
	session, err := rw.GetUser(ctx, identity)
	if err != nil && !errors.Is(err, ErrNotFound) {
		return nil, err
	}

	if err = fn(session); err != nil {
		return nil, err
	}

	_, err = rw.es.Save(ctx, session)

	return session, err
}

// Update is used when the stream already exists.
func (rw *User) Update(
  ctx context.Context,
  identity string,
  fn func(*domain.User) error,
) (*domain.User, error) {
	session, err := rw.GetUser(ctx, identity)
	if err != nil {
		return nil, err
	}

	if err = fn(session); err != nil {
		return nil, err
	}

	_, err = rw.es.Save(ctx, session)
	return session, err
}

@mckinley@twtxt.net Haha, while composing I was wondering two or three times whether I should throw my thoughts in an HTML page instead. But out of utter laziness I discarded that idea. ¯_(ツ)_/¯

I did a take home software engineering test for a company recently, unfortunately I was really sick (have finally recovered) at the time 😢 I was also at the same time interviewing for an SRE position (as well as Software Engineering).

Got the results of my take-home today and whilst there was some good feedback, man the criticisms of my work were harsh. I’m strictly not allowed to share the work I did for this take-home test, and I really can only agree with the “no unit tests” piece of the feedback, I could have done better there, but I was time pressured, sick and ran out of steam. I was using a lot of libraires to do the work so in the end found it difficult to actually think about a proper set of “Unit Tests”. I did write one (in shell) but I guess it wasn’t seen?

The other points were on my report and future work. Not detailed enough I guess? Hmmm 🤔

Am I really this bad? Does my code suck? 🤔 Have I completely lost touch with software engineering? 🤦‍♂️

@movq@www.uninformativ.de I usually only use eggs for baking or fry them for potatoes and spinach. @prologic@twtxt.net Why don’t you have them anymore? Did the fox get them all when the door didn’t close in time? ]:->

Goofs
⌘ Read more

Spent the last few days debugging network issues at work.

Exhausting. You never get a full picture. You poke a little here, poke a little there, … Form a hypothesis and test it. Eventually, maybe, you can narrow it down a bit to some segment or even some component.

A very time consuming process. Even more so if you try not to cause downtimes for your users.

I want a magical device that allows me to look inside a cable/fibre.

But hey, at least we got rid of a bunch of Cisco switches in the process. So there’s that.

Mainly Known For
⌘ Read more

trying some day planning on paper, quantizing all tasks into pomodoros. feels good. my goal is to make software only if/when I’ll feel I’ll need it and have a pretty decent idea of WHAT I need #tracking #selfimprovement #time

Family Reunion
⌘ Read more

I would HIGHLY recommend reading up on the keybase architecture. They designed device key system for real time chat that is e2e secure. https://book.keybase.io/security

A property of ec keys is deriving new keys that can be determined to be “on curve.” bitcoin has some BIPs that derive single use keys for every transaction connected to a wallet. And be derived as either public or private chains. https://qvault.io/security/bip-32-watch-only-wallets/

Consensus Time
⌘ Read more

Took a flu medicine last night, and it knocked me down around 22:00. Woke up at 04:00, then slept till 06:30. All has been seemingly fine, not feeling sleepy, and mostly alert… until now. I am having a really hard time keeping my eyes open. 😬

Startup Aims To Help Software Companies Shift To Usage-Based Pricing Models
The startup Metronome “claims to have developed a billing and data infrastructure platform that is capable of ‘reliably’ processing data at scale so that usage-based companies can iterate on business models without code changes,” reports TechCrunch. “It does this by providing businesses with real-time APIs for their customer … ⌘ Read more

Time to get Gitea configured and running my website, I think 🤔

Alien Mission
⌘ Read more

@prologic@twtxt.net you be the man! I can’t remember the last time something gave as much troubles as this. The mention and the way to handle images are two things that have stuck in my head. Hopefully this is the last time there is an issue with this one! 🤞🏻

@movq@www.uninformativ.de was the request to remove the hash (subject) from showing on twts discarded? I don’t see it on the TODO, so I am curious. Was it something you decided was not worth investing time on?

@fastidious@arrakis.netbros.com 🕑 Hi, the current time is about a quarter past two in the afternoon 🌅.

The battery life in this i9 MacBook Pro from 2018 has diminished to being barely enough to serve as an UPS backup system with enough time to perform a safe shutdown

Haha that guy comes up every time BTC peaks a bit higher. He is never gonna find it.

Killing time in Goodwill, I picked up a desk calculator from a pile. Dude standing next to me goes “what’s that for?”. 😳💀

This pi will now boot directly to ed if the gpio pin is grounded at boot time. ed(1)term v1. :-) http://txtpunk.com/edterm/

@lyse This was basically a trial/proof-of-concept for the real goal: a switch which, if on at boot time, causes the pi to boot straight to ed.

@thecanine@twtxt.net been there a few times! Thank goodness for mosh for when trying to debug from spotty GSM connection and having ssh drop out every few minutes.

Edge Cake
⌘ Read more

Siren
⌘ Read more

@fastidious@arrakis.netbros.com Yes. there is a –flag for it. i have mine set for some crazy long time.

No on gitlab. If its self hosted gitea is best in class.

I can see hosting a mirror on github if only for the redundancy/visibility. Some projects will host but then direct contributions on their self host. Like Go does.

I would suggest using a vanity domain that can redirect tools like go get to hosting of choice. And not require rewriting all the packages any time it gets moved.

Btw… You guys have gotta start posting more pictures/videos a bit more regularly 😂 Every time I show Yarn.social off to a friend to “sell” them the platform and get them off their privacy eroding garbage Facebook/Twitter/etc) The no. #1 question I get asked is:

Oh is this only comments/text

🤣 Let’s show off the platform as a whole a bit eh? 😅

Hmmm so… We seem to have a few pods offline in the network 😂 Also 😢

• @jlj@twt.nfld.uk’s twt.nfld.uk => 504 Gateway Time-out
  
• @adi@f.adi.onl’s f.adi.onl => 200 OK but doens’t appear to be a pod anymore?! 🤔
  
• @eldersnake@yarn.andrewjvpowell.com’s personal pod => offline due to lack of Solar/Battery power? 😅
  
• @lohn@tw.lohn.in’s personal pod => 503 Service Unavailable
  

It’s a bad day for Yarn.social 🤣

Good thing it’s all decentralised 😉

👋 Q&A: Let’s discuss the removal of Editing and Deleting your last Twt. This is something @fastidious@twtxt.net has raised to me on IRC and something I find quite a valid approach to this. Over time I believe the utility and value of “Editing” and “Deleting” one’s last Twt isn’t as valuable as we’d like and increased complexity and introduces all kinds of side-effects that are hard to manage correctly. I vote for the removal of this feature from yarnd, the mobile app nor API support this anyway…

@eldersnake@yarn.andrewjvpowell.com Is there still an issue (sortt was out for most of the day) with the We 💚 Privacy Club pod? 🤔 I hope no weird bug has been introduced 😢 AFIK none of the auth/session handling code has been touched in quite some time.

My Friday has started. Now, what will I do with this much time?! LOL! Got to remember “dum loquimur, fugerit invida aetas”. ⏳

My nutritional supplements aim should be:

• 1 or 1.5 cups of lentils (or any beans you might like better).
  
• 2 or 2.5 cups of bitter greens.
  
• 1 cup of your favourite protein (or an egg), grilled, or fried with a little of olive oil.
  
• 1 or 2 tomatoes, or a handful if of the cherry type.
  
• No added sugars. If it is sweet, make it have fibre.
  
• No added salt (or very little and ionised), as salt is everywhere.
  

Related, I tried wild rice for the first time yesterday. It was different, in a good way.

Went to sleep at 01:00, woke up at 06:30, having a really hard time keeping my eyes open, and there is still one more hour till calling it quits. Does being this sleepy counts as being sick?

Standby BIG-IP F5s upgraded to TMOS 16.1 (LTS). All their pairs (now on standby) will be upgraded on Wednesday. Just giving the TMOS some time to settle down, and feel at home. Hahahaha!

Rule 299:

After you’ve exploited someone, it never hurts to thank them. That way, it’s easier to exploit them next time.

@prologic@twtxt.net
It is still too early, and too few of us. Give it some time, and your wife might revise her statement. 😂

@movq@www.uninformativ.de what is your cron job repeat time for jenny? Currently I have mine to every minute, and while it allows me to participate fairly quick on conversations it has some drawbacks: it captures every single edited twt, so I end up with seemingly the same twt, but not quite—as it has minor edits, etc. So, “repeats”. Perhaps setting cron to check every 5 minutes or so is best?